CUBEPILOT - Power Selection Module (HX4-06006
CubePilot- Power Selection Module (HX4-06006)
Package Contains: 1 x Power Selection Module
Note- This product is intended for developers designing custom carrier boards for the Pixhawk 2.1 flight controller.
Overview:
Power inputs must be between 4.4v and 5.7v
Power output is the same voltage as the selected input.
Power can be taken off the PSM in different methods, allowing for different subsystems to fail gracefully. This module also holds the Buzzer controller.
The Aux power input has a Zener clamping it to 5.6v, this zener is protected from continuous over voltages by a fuse and fet.
CubePilot- Power Selection Module (HX4-06006)
Package Contains: 1 x Power Selection Module
Note- This product is intended for developers designing custom carrier boards for the Pixhawk 2.1 flight controller.
Overview:
Power inputs must be between 4.4v and 5.7v
Power output is the same voltage as the selected input.
Power can be taken off the PSM in different methods, allowing for different subsystems to fail gracefully. This module also holds the Buzzer controller.
The Aux power input has a Zener clamping it to 5.6v, this zener is protected from continuous over voltages by a fuse and fet.
CubePilot- Power Selection Module (HX4-06006)
Package Contains: 1 x Power Selection Module
Note- This product is intended for developers designing custom carrier boards for the Pixhawk 2.1 flight controller.
Overview:
Power inputs must be between 4.4v and 5.7v
Power output is the same voltage as the selected input.
Power can be taken off the PSM in different methods, allowing for different subsystems to fail gracefully. This module also holds the Buzzer controller.
The Aux power input has a Zener clamping it to 5.6v, this zener is protected from continuous over voltages by a fuse and fet.