CUBEPILOT - The Cube Orange+ Standard Set with ADS-B Carrier Board (HX4-06222)
CubePilot- The Cube Orange+ Set with ADS-B Carrier Board (HX4-06222)
Package contains:
1 x The Cube Orange + with the ADS-B Carrier Board
1 x Power Brick Mini
1 x Buzzer Cable
2 x CAN Cable
2 x I2C Cable
2 x Power Brick Mini Cable
1 x GPS1 GH Cable
2 x Telem Cable
1 x I2C Board
4 x Screws
3 x 3M Large Sticker
2 x 3M Medium Sticker
4 x 3M Small Sticker
Features
1. Faster H7 SOC with 1MB ram.
2. Upgraded triple redundant IMU sensors for extra redundancy.
3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.
4. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs.
5. The entire flight management unit(FMU) and inertial management unit(IMU) are housed in a reatively small form factor (a cube).
6. Fully Cubepilot carrierboard compatible, all inputs and outputs go through a 80-pin DF17 connector, allowing a plug-in solution for manufacturers of commercial systems.
7. Manufacturers can design their own carrier boards to suit their specific needs now and in the future.
CubePilot- The Cube Orange+ Set with ADS-B Carrier Board (HX4-06222)
Package contains:
1 x The Cube Orange + with the ADS-B Carrier Board
1 x Power Brick Mini
1 x Buzzer Cable
2 x CAN Cable
2 x I2C Cable
2 x Power Brick Mini Cable
1 x GPS1 GH Cable
2 x Telem Cable
1 x I2C Board
4 x Screws
3 x 3M Large Sticker
2 x 3M Medium Sticker
4 x 3M Small Sticker
Features
1. Faster H7 SOC with 1MB ram.
2. Upgraded triple redundant IMU sensors for extra redundancy.
3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.
4. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs.
5. The entire flight management unit(FMU) and inertial management unit(IMU) are housed in a reatively small form factor (a cube).
6. Fully Cubepilot carrierboard compatible, all inputs and outputs go through a 80-pin DF17 connector, allowing a plug-in solution for manufacturers of commercial systems.
7. Manufacturers can design their own carrier boards to suit their specific needs now and in the future.
CubePilot- The Cube Orange+ Set with ADS-B Carrier Board (HX4-06222)
Package contains:
1 x The Cube Orange + with the ADS-B Carrier Board
1 x Power Brick Mini
1 x Buzzer Cable
2 x CAN Cable
2 x I2C Cable
2 x Power Brick Mini Cable
1 x GPS1 GH Cable
2 x Telem Cable
1 x I2C Board
4 x Screws
3 x 3M Large Sticker
2 x 3M Medium Sticker
4 x 3M Small Sticker
Features
1. Faster H7 SOC with 1MB ram.
2. Upgraded triple redundant IMU sensors for extra redundancy.
3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.
4. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs.
5. The entire flight management unit(FMU) and inertial management unit(IMU) are housed in a reatively small form factor (a cube).
6. Fully Cubepilot carrierboard compatible, all inputs and outputs go through a 80-pin DF17 connector, allowing a plug-in solution for manufacturers of commercial systems.
7. Manufacturers can design their own carrier boards to suit their specific needs now and in the future.